Skybell – Not Recording

Jan 16, 2020
You are here:
Estimated reading time: < 1 min

Symptoms: Your SkyBell is not recording, but you can watch live and you are still receiving notifications.

A manual soft reset can be performed by doing the following:

  1. Begin holding down your SkyBell doorbell button
  2. The SkyBelll will flash in the following pattern.​ (Flashing Green, Flashing Red-Green, Flashing Blue)
  3. Once the SkyBell begins flashing BLUE release the button and allow the SkyBell to reboot. (This will take approximately a minute)

The SkyBell will begin recording within 10 minutes after rebooting.


For more assistance with troubleshooting your Skybell, visit the Skybell comprehensive support center.

Was this article helpful?
Dislike 0
Views: 682