IQ Panel 2 – Add Thermostat

Jan 17, 2020
You are here:
Estimated reading time: 1 min

1. Press or swipe down clock display at top for Settings Tray then press SETTINGS

Door_Lock_01.jpg Door_Lock_02.jpg

2. Press ADVANCED SETTINGS then enter Installer Code 1111

Door_Lock_04.jpg Door_Lock_03.jpg


Door_Lock_06.jpg Door_Lock_05.jpg

4. Press ADD DEVICE then PAIR

Door_Lock_07.jpg Door_Lock_08.jpg

5. IQ Panel 2 enters Z-Wave learn mode

Door_Lock_09.jpg ADC-T2000 Thermostat

1. Press MODE button to display temperature, press MODE until heat/cool icons disappear

T2000_Setup_03.jpg T2000_Setup_02.jpg

2. Hold DOWN ARROW until Radio Wave Icon appears below temperature display

T2000_Setup_03.jpg ADC-T3000 Thermostat

1. Press MENU button to display Menu then press DOWN ARROW until SETTINGS

Alarm.com_ADC-T3000_Learn_00.jpg Alarm.com_ADC-T3000_Learn_01.jpg

2.  Press ENTER button to select then press DOWN ARROW until NETWORK 

Alarm.com_ADC-T3000_Learn_02.jpg Alarm.com_ADC-T3000_Learn_03.jpg

3. Press ENTER button to select then press UP or DOWN ARROW to highlight ADD

Alarm.com_ADC-T3000_Learn_04.jpg Alarm.com_ADC-T3000_Learn_05b.jpg

4. Press ENTER button to select and start Z-Wave learn mode

Alarm.com_ADC-T3000_Learn_05.jpg Alarm.com_ADC-T3000_Learn_06.jpg

5. Learning may take up to 1 minute to complete and exit


Radio Thermostat CT-20 and GE IS-ZW-TSTAT-100 Thermostat

Remove top cover then press MATE button


Radio Thermostat CT30, CT100, CT101


1. At thermostat press MENU button, “r1” displays and MATE appears under antenna icon

Radio_Thermostat_CT100_02.jpg Radio_Thermostat_CT100_01.jpg

2. Press MATE, which begins flashing, if successful LINK appears, press MENU to exit

Radio_Thermostat_CT100_04.jpg Radio_Thermostat_CT100_Link.jpg

Radio Thermostat CT110

Press left side Antenna button


GoControl RCS Technologies TBZ-48 

1. Hold FAN button 5 seconds until SETUP then press UP ARROW button until ZWAVE

GoControl_Thermostat_Learn_01.jpg GoControl_Thermostat_Learn_02.jpg

2. Press MODE button to select then press MODE button again to learn

GoControl_Thermostat_Learn_03.jpg GoControl_Thermostat_Learn_04.jpg

3. If successful press FAN button to exit, antenna icon appears by temperature display

GoControl_Thermostat_Learn_05.jpg GoControl_Thermostat_Learn_06.jpg

Trane Thermostat

1. Press MENU button twice, press Down Arrow to ZWave Install then press SELECT button

Trane_TZ45_Learn_01.png Trane_TZ45_Learn_02.png

2. Press Up Arrow button then when finished press DONE to exit

Trane_TZ45_Learn_03.png Trane_TZ45_Learn_05.png

Qolsys Programming continued…

6. Press NAME then select name or press CUSTOM NAME to create a name

Radio_Thermostat_CT100_10.jpg Radio_Thermostat_CT100_11.jpg

7. If Custom Name press CUSTOM DESC, enter name then press CHECK or KEYPAD icon

Radio_Thermostat_CT100_12.jpg Radio_Thermostat_CT100_13.jpg

8. Press ADD to save, press BACK or HOME to exit


Was this article helpful?
Dislike 0
Views: 75