Specifications
- 1920 x 1080p video resolution
- HDR High Dynamic Range video recording
- 15′ night vision range
- 117° horizontal and vertical field of view
- 2-Way Talk / Listen
- Micro SD slot (not functional at this time)
- WiFi 802.11 b/g/n
- Ethernet connection
- Operating temperature 32° F to 104° F
Factory Default
Warning! Erases everything, camera must be re-added to Alarm.com and WiFi configured
Remove bottom rubber cover and hold WPS button 15 seconds
WiFi Setup by WPS Enrollment
1. Hold WPS button for 3 seconds until front LED flashes blue
2. Press and release router WPS button or enable WPS in router programming
3. Wait 2 minutes for the camera LED to flash then turn solid green if successful
WiFi Setup by AP Access Point
1. Hold WPS button for 6 seconds until front LED flashes white
2. Go to smartphone WiFi settings and look for ALARM xx:xx:xx then press CONNECT
3. Open browser and enter http://v523install/ then press SCAN for WiFi networks
4. Select WiFi network, scroll up and enter encryption then press SUBMIT then OK to exit
5. Camera LED turns green if successful or red if failure
Hardwire Connection to Router
Plug Ethernet cable into back of camera and into unused port on WiFi network router
Add Camera using Customer Website
Note: Camera must be connected to customer’s router by Ethernet cable or WiFi
1. Login to Alarm.com customer website and press VIDEO
2. Press SETTINGS
3. Scroll to bottom of page and press ADD VIDEO DEVICE
4. Camera should be detected, enter camera name then press INSTALL
5. Alarm.com downloads information to camera, this may take up to 5 minutes
6. When complete press LIVE VIEW to view camera
Add Camera using Smartphone App
Note: Camera must be connected to customer’s router by Ethernet cable or WiFi
1. Press top left Bars to access side menu then press VIDEO then press top right GEAR icon
2. Press ADD VIDEO DEVICE then press INSTALL then enter new camera name then NEXT
3. Camera may take several minutes to configure, press X at top left to exit
Troubleshooting
- Power cycle the camera by unplugging and plugging in power adapter
- Move closer to WiFi router
- If issues persist, try resetting the camera to factory defaults
LED Reference Guide
- Solid Green = Local network and Internet connection OK
- Flashing Green = Local network connection OK, Internet connection bad
- Solid Red = No local network or Internet connection
- Flashing Red = Camera booting
- Flashing Blue = Camera in WPS WiFi learn mode
- Flashing White = Camera in WiFi AP learn mode
- Flashing Yellow = Camera in Bluetooth Pairing mode